7,261
edits
Changes
Jump to navigation
Jump to search
Translations:Manuals:BXFbl:Setupmenu D/3/en (view source)
Revision as of 09:41, 29 April 2024
, 17 days agoImporting a new version from external source
=Adjustment on the device=
To select the desired servo frequency, move the rudder stick repeatedly in one direction until the Status-LED lights in the correct color at SETUP MENU point '''D'''. Please note that depending on the rudder servo pulse width chosen at Menu Point C, you may not be able to select 560Hz! Servos with Standard pulse width of 1500/1520µs can only run at maximum frame rate of 400Hz.<br />
<br />
{{TABLEV5|Rudder servo frequency |50 Hz|165 Hz|270 Hz|333 Hz|560 Hz}}
<br />
'''Note:''' When you set a different frequency using the StudioX App the Status LED will be '''off'''. You can switch back to a preset setting by tapping the rudder stick as described, but this will remove your custom setting!<br />
<br />
<br />
To select the desired servo frequency, move the rudder stick repeatedly in one direction until the Status-LED lights in the correct color at SETUP MENU point '''D'''. Please note that depending on the rudder servo pulse width chosen at Menu Point C, you may not be able to select 560Hz! Servos with Standard pulse width of 1500/1520µs can only run at maximum frame rate of 400Hz.<br />
<br />
{{TABLEV5|Rudder servo frequency |50 Hz|165 Hz|270 Hz|333 Hz|560 Hz}}
<br />
'''Note:''' When you set a different frequency using the StudioX App the Status LED will be '''off'''. You can switch back to a preset setting by tapping the rudder stick as described, but this will remove your custom setting!<br />
<br />
<br />