Now we're almost done. To get the USB2SYS interface working it is required to additionaly install the driver files for the interface. These are necessary so that Windows can use the interface as serial port. The driver will not be installed directly with the StudioX but the driver installer will be copied to your BEASTX folder. So after the installation open the "Driver Installation" from the BEASTX folder in Windows START menu:
+
Now we're almost done. '''Before using the software make sure that the driver files for your USB2SYS interface have been installed and install the files if necessary.''' For further information see this page: [[USB2SYS/SPMA3030 driver installation]].<br />