Changes

'''Note:''' The sensor direction colors may differ between different BEASTX devices and different MICROBEAST/MICROBEAST PLUS firmware versions. Therefore the Status-LED colors should be used as reference for one device with one specific firmware version only. We highly recommend not to rely on the Status-LED color when transfering setups from one device to another. Always check sensor directions manually!<br />

'''Note:''' The sensor direction colors may differ between different BEASTX devices and different MICROBEAST/MICROBEAST PLUS firmware versions. Therefore the Status-LED colors should be used as reference for one device with one specific firmware version only. We highly recommend not to rely on the Status-LED color when transfering setups from one device to another. Always check sensor directions manually!<br />

<br />

<br />

When the RPM Governor feature is installed on your unit push the button to save the configuration and to proceed to [[Manuals:MB_Plus:Setupmenu_N|Setup menu point '''N''']]. Otherwise pushing the button will end the Setup menu adjustment and you will get back into operation mode.

When the RPM Governor feature is installed on your unit and you're using a single-line receiver, push the button to save the configuration and to proceed to [[Manuals:MB_Plus:Setupmenu_N|Setup menu point '''N''']]. Otherwise pushing the button will end the Setup menu adjustment and you will get back into operation mode.

</translate>

</translate>