Bureaucrats, Administrators, translate-proofr
15,502
edits
Changes
Jump to navigation
Jump to search
Line 6:
Line 6: − When selecting a specific type of single-line receiver the appropriate type of receiver channel allocation will be preset in MICROBEAST PLUS. Please refer to the tables below and check if your radio transmits the channels in the defined order. To know the channel assignment of your transmitter you can check the user manual of the transmitter or look at the servo monitor of the transmitter if it has this feature. If in doubt ask the manufacturer of your transmitter.<br />+ Line 47:
Line 47: − In case the ordering differs from the given tables, you have to assign the channel order step by step through this and the following menu points. How this works is described below.<br /> − + + +
no edit summary
===Preset channel assignment===
===Preset channel assignment===
For each specific type of single-line receiver selected at [[Manuals:MB_Plus:Receiver_setup_menu_A|menu point '''A''']] there is an appropriate type of receiver channel allocation saved in MICROBEAST PLUS. Please refer to the tables below and check if your radio transmits the channels in the defined order respectively each stick function on the radio is transmitted using the specified channel. To know the channel assignment of your transmitter you can check the user manual of the transmitter or look at the servo monitor of the transmitter if it has this feature. If in doubt ask the manufacturer of your transmitter.<br />
<br />
<br />
{|cellspacing="0" cellpadding="2" border="1" style="text-align:center;border:0px solid;"
{|cellspacing="0" cellpadding="2" border="1" style="text-align:center;border:0px solid;"
|}<br />
|}<br />
<br />
<br />
To load the preset channel assignment wait until the Status-LED lights blue and then hold down the button for several seconds. The yellow Menu-LED will immediately jump to [[Manuals:MB_Plus:Receiver_setup_A|Receiver menu point '''N''']].<br />
To load the preset channel assignment wait until the Status-LED lights blue and then hold down the button for several seconds. The yellow Menu-LED will immediately jump to [[Manuals:MB_Plus:Receiver_setup_A|Receiver menu point '''N''']].<br />
<br />
<br />
[[File:Channel_assignment.png|x200px|none]]
[[File:Channel_assignment.png|x200px|none]]
<br />
<br />
{{QUOTE|* If the Status-LED stays red at one of the menu point B - H, it means that there is no valid remote control signal available. A channel assignment in this case is impossible! Check if the receiver is properly [[Manuals:MB_Plus:Receiver_Installation/en#Receiver_binding|bound to the transmitter]] and that a receiver/transmission protocol of the correct type is selected in [[Manuals:MB_Plus:Receiver_setup_menu_A|Receiver menu point '''A''']]. Switch off the power and restart the receiver type setup procedure from the beginning.<br />
'''In case the ordering differs from the given tables, you have to manually assign the channel order step by step. How this works is described below.'''<br />
<br />
{{QUOTE|* If the Status-LED stays red at menu point B, this means that there is no valid remote control signal available. A channel assignment in this case is impossible! Check if the receiver is properly [[Manuals:MB_Plus:Receiver_Installation/en#Receiver_binding|bound to the transmitter]] and that a receiver/transmission protocol of the correct type is selected in [[Manuals:MB_Plus:Receiver_setup_menu_A|Receiver menu point '''A''']]. Switch off the power and restart the receiver type setup procedure from the beginning.<br />
* You can also load the default assignment by pushing the button for several seconds in any of the following points for function assignment. This will erase all previously made individual assignments.}}<br />
* You can also load the default assignment by pushing the button for several seconds in any of the following points for function assignment. This will erase all previously made individual assignments.}}<br />
<br />
<br />