Changes

<br />

<br />

===Adjusting the dials===

===Adjusting the dials=== <!--T:8-->

<br />

<br />

[[File:Dials_overview.png|noframe|none|x200px]]<br />

[[File:Dials_overview.png|noframe|none|x200px]]<br />

<br />

<br />

===Flying===

===Flying=== <!--T:9-->

After turning on the receiver power supply wait until MICROBEAST PLUS has fully initialized. This is displayed by a short movement of the swashplate servos. For initialization it is irrelevant whether the helicopter is leveled horizontally! Only important is that it is not moved as long as the calibration of the sensor positions takes place (LEDs lights '''A''' - '''G''' running). Also the control sticks of the transmitter must not be moved as long as MICROBEAST PLUS calibrates the stick center positions (LEDs '''H''' - '''N'''). If the initialization is not completed even after several minutes, read the [[Help:FAQ|Trouble shooting guide]].<br />

After turning on the receiver power supply wait until MICROBEAST PLUS has fully initialized. This is displayed by a short movement of the swashplate servos. For initialization it is irrelevant whether the helicopter is leveled horizontally! Only important is that it is not moved as long as the calibration of the sensor positions takes place (LEDs lights '''A''' - '''G''' running). Also the control sticks of the transmitter must not be moved as long as MICROBEAST PLUS calibrates the stick center positions (LEDs '''H''' - '''N'''). If the initialization is not completed even after several minutes, read the [[Help:FAQ|Trouble shooting guide]].<br />

<br />

<br />