Changes

{{DISPLAYTITLE: Usage of AttitudeControl (optional)|noerror}}

{{DISPLAYTITLE: Usage of AttitudeControl (optional)|noerror}}

{{TOC_MBPlus}}

{{TOC_MBPlus}}

[[File:Warning.png|sub|18px]] In this mode it is absolutely necessary to use a switch that changes the control directions directly and without intermediate steps. In particular, do not use a slider on the transmitter! Otherwise, when you activate AttitudeControl the tail gyro sensitivity would be decreased to 0% before the system turns on the AttitudeControl. So you would have 0% of tail gyro gain when AttitudeControl is active. <br >

[[File:Warning.png|sub|18px]] In this mode it is absolutely necessary to use a switch that changes the control directions directly and without intermediate steps. In particular, do not use a slider on the transmitter! Otherwise, when you activate AttitudeControl the tail gyro sensitivity would be decreased to 0% before the system turns on the AttitudeControl. So you would have 0% of tail gyro gain when AttitudeControl is active. <br >

<br >

<br >

'''Note for software versions before 4.1.x:''' When AttitudeControl is enabled in general the tail gyro can not be used in Normal-Rate mode. If operating AttitudeControl with separate switch channel (see above) the channel for tail gyro gain activates HeadingLock - Mode in both directions. The sign of deflection is not relevant here, just the amount of deflection is important. When you also want to use the tail gyro in Normal-Rate mode (as described [[Manuals:MB_Plus:Flying|here]]) you must disable AttitudeControl at [[Manuals:MB_Plus:Parametermenu_I|Parameter menu point '''I''']] (by setting the Status-LED to „off“ state).}}

'''Note for software versions before 4.1.x:''' When AttitudeControl is enabled in general the tail gyro can not be used in Normal-Rate mode. If operating AttitudeControl with separate switch channel (see above) the channel for tail gyro gain activates HeadingLock - Mode in both directions. The sign of deflection is not relevant here, just the amount of deflection is important. When you also want to use the tail gyro in Normal-Rate mode (as described [[Manuals:MB_Plus:Flying|here]]) you must disable AttitudeControl at [[Manuals:MB_Plus:Parametermenu_I|Parameter menu point '''I''']] (by setting the Status-LED to „off“ state).}}<br />

<br />

<br />