Translations:Help:FAQ:General/4/en

Is it possible to connect 4 swash plate servos?

Firmware Version 4.x.x and lower: No, 3 swashplate servos only.

Firmware Version 5.x.x: Yes, you can use up to 4 swash servos when using a single line receiver, i.e. for large scale helicopters. In this case we recommend to connect the servo outputs to a separate power distribution system. The 4th servo (2nd elevator servo) is connected to CH7 output of the MICROBEAST PLUS (only signal out!). See manual for further informations.