Translations:Manuals:BXFbl:Intro/6/en
Jump to navigation
Jump to search
Technical specification
- wide input voltage range from 4 to 9 Volts
- supports nearly all types of radio systems with conventional receiver wiring as well as lots of different serial signal receivers like SBUS, XBUS, EXBUS, iBus, UDI, SRXL, SRXL2, TBS CRSF (OpenTX, EdgeTX and ELRS radios), FRSky F.Port, Serial PPM, SUMD, Spektrum/JR/ALIGN remote satellites (some protocols are not available on all devices, please see device specific instructions)
- preset swash plate mixing for mCCPM and 90, 120, 140 eCCPM + fully customizable swash mixing with up to 4 swash plate servos and virtual phasing for scale helicopters
- swash plate servo update rate with up to 400Hz (not on all devices, please see device specific instructions)
- integrated tail gyro with torque precompensation ("RevoMix") supports all types of rudder servos with 760, 960 and 1500/1520µs pulse width and up to 600Hz update rate (not on all devices, please see device specific instructions)
- integrated motor governor for electric and nitro/gas driven helicopters (requires rpm sensor pickup or esc with rpm signal output; not available for NANOBEAST)
- also supports helicopters with tail motor drive instead of conventional tail drive with servo control