Translations:Manuals:MBUltraFblV5:Receiver M/de/13/en

From BEASTX Wiki
Jump to navigation Jump to search

Scorpion® Tribunus II

Connect the control wire (MASTER) of your Scorpion® ESC to port [IO1]. Connect the programming port (PC) of your Scorpion® ESC to port [IO2] using a standard servo wire with male servo plugs on each end.

Scorpion.png



To enable telemetry you must programm your Scorpion® ESC with the supplied Sproto plattform. Please set parameter 1E - communication protocol to "UnSc". For further assistance please read the manual for your ESC or contact the manufacturer of your ESC.

Sproto 1 .png
Sproto 2 .png
Sproto 3 .png




Retrieved from "https://wiki.beastx.com/index.php?title=Translations:Manuals:MBUltraFblV5:Receiver_M/de/13/en&oldid=21177"