Translations:Manuals:AR7210FblV5:Governormenu D/5/de: Difference between revisions

From BEASTX Wiki
Jump to navigation Jump to search
Newer edit →
Created page with "{{DISPLAYTITLE:GOVERNOR MENU D - Setting up the transmitter|noerror}} {{TOC_AR7210V5|Manuals:AR7210FblV5:Governormenu_C/de|Manuals:AR7210FblV5:Governormenu_E/de|GOVMENU}} __TO..."
(No difference)

Revision as of 22:53, 30 July 2022

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Manuals:AR7210FblV5:Governormenu D)
{{DISPLAYTITLE:GOVERNOR MENU D - Setting up the transmitter|noerror}}
{{TOC_AR7210V5|Manuals:AR7210FblV5:Governormenu_C/en|Manuals:AR7210FblV5:Governormenu_E/en|GOVMENU}}
__TOC__
<br />

AR7210BX V5

1. Introduction

2. Hardware installation

3. Radio system

4. Basic setup
Device orientation
Swashplate frequency
Rudder pulse width
Rudder frequency
Rudder control
Swash mixing
Servo trim
Servo directions
Cyclic throw
Collective pitch
Servo limit
Cyclic directions
5. Headspeed Governor
Activating the governor
Sensor test mode
Throttle low position
Throttle high position
Transmitter setup
Signal divider
Main gear ratio
6. Additional settings
Trimming
Control style
Special parameters
Gains

7. AttitudeControl (Self leveling)

8. Bank Switching

9. Factory reset

10. Firmware update

← →


Retrieved from "https://wiki.beastx.com/index.php?title=Translations:Manuals:AR7210FblV5:Governormenu_D/5/de&oldid=19906"