Manuals:MBPlusFblV52:Setupmenu H/en: Difference between revisions

Jump to navigation Jump to search
← Older edit
No edit summary
FuzzyBot (talk | contribs)
8,014 edits
Updating to match new version of source page
 
(One intermediate revision by one other user not shown)
Line 6: Line 6:
At SETUP MENU point H move the collective pitch on the transmitter and adjust the servo directions so that all servos are moving the swashplate up and down together (the other functions are disabled here, as they are not of interest at this setup step!). After adjusting servo directions make sure that the pitch direction is correct! You can either do this by setting the servo directions correctly right from the beginning or by changing the direction of the pitch channel in the transmitter later.<br />   
At SETUP MENU point H move the collective pitch on the transmitter and adjust the servo directions so that all servos are moving the swashplate up and down together (the other functions are disabled here, as they are not of interest at this setup step!). After adjusting servo directions make sure that the pitch direction is correct! You can either do this by setting the servo directions correctly right from the beginning or by changing the direction of the pitch channel in the transmitter later.<br />   
<br />
<br />
{{QUOTE|'''Please note:''' Usually you can not reverse the servos with the servo reverse function of your transmitter! The transmitter only controls the functions of MICROBEAST PLUS, not the servos! Reversing a channel in the transmitter will only reverse the control function in total. There is one exception: with mechanical mixing (mCCPM) each servo is controling one function, so actually here you can reverse the servos be reversing the sticks/functions in the transmitter, too. Because of this, the servo reversing in MICROBEAST PLUS is not necessary and not provided when using the mCCPM swash type! SETUP MENU point H will be skipped in this case.}}<br />
{{QUOTE|'''Please note:''' Usually you can't reverse the servos with the servo reverse function of your transmitter! The transmitter only controls the functions of MICROBEAST PLUS, not the servos! Reversing a channel in the transmitter will only reverse the control function in total. So reversing the function will change directions of all servos at once.}}<br />
<br />
<br />
<br />
<br />
Line 28: Line 28:


=Setup with StudioXm=
=Setup with StudioXm=
Stelle beim Menüpunkt ''Swashplate servo directions'' die Servolaufrichtungen so ein, dass sich die Taumelscheibe auf und ab bewegt, wenn Pitch gesteuert wird und vergewissere Dich, dass die Steuerrichtung korrekt ist.<br />
When the adjustment screen appears, make sure the pitch is moving correctly as described above and set servo direction for each servo as necessary.<br />
<br />
<br />
[[File:Basic_setup_servo_trim.PNG|x250px]]<br />
[[File:Basic_setup_servo_trim.PNG|x250px]]<br />
<br />
<br />
<br />
<br />
Retrieved from "https://wiki.beastx.com/index.php?title=Manuals:MBPlusFblV52:Setupmenu_H/en"