Manuals:MBPlusFblV52:Setupmenu M: Difference between revisions
Jump to navigation
Jump to search
Shornstein (talk | contribs) Copied from Manuals:MBPlusFblV5:Setupmenu L, revision 15922 |
Shornstein (talk | contribs) No edit summary |
||
| Line 1: | Line 1: | ||
<translate> | <translate> | ||
<!--T:1--> | <!--T:1--> | ||
{{DISPLAYTITLE:SETUP MENU | {{DISPLAYTITLE:SETUP MENU M - Servo limit|noerror}} | ||
{{TOC_MBPlusV5|Manuals: | {{TOC_MBPlusV5|Manuals:MBPlusFblV52:Setupmenu_K/en|Manuals:MBPlusFblV52:Setupmenu_M/en|SETUPMENU|2}} | ||
__TOC__ | __TOC__ | ||
<br /> | <br /> | ||
<!--T:2--> | <!--T:2--> | ||
At SETUP MENU point | At SETUP MENU point M we can limit the servo movement so that the servos will not come out of the possible range of action and cause jamming of the linkages or swashplate. But ideally we want to limit as less as possible, so that the system can control the helicopter without any restrictions! | ||
<br /> | <br /> | ||
For the ease of use, the limiting is only one value to adjust but which will affect all servos and all possible positions at once, especially when steering into the corners. So when adjusting the limit, you move pitch, aileron and elevator all at once and into all possible positions and check if there is some point where the servos get jammed. Adjust the limit so that there is just no binding at any point.<br /> | For the ease of use, the limiting is only one value to adjust but which will affect all servos and all possible positions at once, especially when steering into the corners. So when adjusting the limit, you move pitch, aileron and elevator all at once and into all possible positions and check if there is some point where the servos get jammed. Adjust the limit so that there is just no binding at any point.<br /> | ||