Manuals:MBPlusFblV52:Receiver N: Difference between revisions
Jump to navigation
Jump to search
Shornstein (talk | contribs) Created page with "<translate> {{DISPLAYTITLE:Receiver Menu - Throttle failsafe|noerror}} {{TOC_MBPlusV5|Manuals:MBPlusFblV52:Receiver_M/en|Manuals:MBPlusFblV52:Setupmenu_intro/en||2}} __TOC__ <..." |
Shornstein (talk | contribs) Marked this version for translation |
||
| Line 1: | Line 1: | ||
<translate> | <translate> | ||
<!--T:1--> | |||
{{DISPLAYTITLE:Receiver Menu - Throttle failsafe|noerror}} | {{DISPLAYTITLE:Receiver Menu - Throttle failsafe|noerror}} | ||
{{TOC_MBPlusV5|Manuals:MBPlusFblV52:Receiver_M/en|Manuals:MBPlusFblV52:Setupmenu_intro/en||2}} | {{TOC_MBPlusV5|Manuals:MBPlusFblV52:Receiver_M/en|Manuals:MBPlusFblV52:Setupmenu_intro/en||2}} | ||
| Line 5: | Line 6: | ||
<br /> | <br /> | ||
=Adjustment on the device= | =Adjustment on the device= <!--T:2--> | ||
At Menu Point N of the RECEIVER MENU you teach the failsafe position for throttle channel. In case the receiver signal is interrupted during operation the throttle servo/speed controller connected to the [CH5] Output is automatically moved to this position. This particularly is the case: | At Menu Point N of the RECEIVER MENU you teach the failsafe position for throttle channel. In case the receiver signal is interrupted during operation the throttle servo/speed controller connected to the [CH5] Output is automatically moved to this position. This particularly is the case: | ||
* if using a single-line receiver that turns of the single-line signal in case of signal loss between receiver and transmitter (e.g. Spektrum® satellite receiver or Graupner® receiver in „SUMDOF“ mode) | * if using a single-line receiver that turns of the single-line signal in case of signal loss between receiver and transmitter (e.g. Spektrum® satellite receiver or Graupner® receiver in „SUMDOF“ mode) | ||
| Line 25: | Line 26: | ||
<br /> | <br /> | ||
=Setup with StudioX= | =Setup with StudioX= <!--T:3--> | ||
After you've set the control functions you will be asked to program the failsafe position for the throttle channel. In case the single-line signal is interrupted during operation, the throttle servo/speed controller connected to the [CH5] Output is automatically moved to this position. This particularly is the case: | After you've set the control functions you will be asked to program the failsafe position for the throttle channel. In case the single-line signal is interrupted during operation, the throttle servo/speed controller connected to the [CH5] Output is automatically moved to this position. This particularly is the case: | ||
* if using a single-line receiver that turns of the single-line signal in case of signal loss between receiver and transmitter (e.g. Spektrum® satellite receiver or Graupner® receiver in „SUMDOF“ mode) | * if using a single-line receiver that turns of the single-line signal in case of signal loss between receiver and transmitter (e.g. Spektrum® satellite receiver or Graupner® receiver in „SUMDOF“ mode) | ||