Manuals:MBPlusFblV52:Radio System: Difference between revisions
Jump to navigation
Jump to search
Shornstein (talk | contribs) No edit summary |
Shornstein (talk | contribs) Marked this version for translation |
||
| Line 49: | Line 49: | ||
<br /> | <br /> | ||
<!--T:9--> | == Single wire without telemetry == <!--T:9--> | ||
* The single-line connection wire is plugged into the [DI1] input of MICROBEAST PLUS | * The single-line connection wire is plugged into the [DI1] input of MICROBEAST PLUS | ||
* The throttle servo or ESC is connected to the [CH5] output. When using a speed controller with BEC, from here the power will be distributed to receiver and servos. | * The throttle servo or ESC is connected to the [CH5] output. When using a speed controller with BEC, from here the power will be distributed to receiver and servos. | ||
| Line 84: | Line 83: | ||
<br /> | <br /> | ||
<!--T:7--> | == Single wire with telemetry == <!--T:7--> | ||
Receivers with bidirectional telemetry uplink (Spektrum® SRXL2 & Jeti® EXBUS) must be connected to the pin board at the side of MICROBEAST PLUS. To connect a receiver with standard servo connectors, i.e. the SPEKTRUM® '''AR6610T''', '''AR8020T''' or JETI EXBUS receivers, you need an adapter from servo plug to JST-ZH type. We offer a special adapter if needed - Order nr. BXA76403. Voltage is the first pin from the left, Signal is connected at the third pin from the left. Minus is the second pin from the front/right.<br /> | Receivers with bidirectional telemetry uplink (Spektrum® SRXL2 & Jeti® EXBUS) must be connected to the pin board at the side of MICROBEAST PLUS. To connect a receiver with standard servo connectors, i.e. the SPEKTRUM® '''AR6610T''', '''AR8020T''' or JETI EXBUS receivers, you need an adapter from servo plug to JST-ZH type. We offer a special adapter if needed - Order nr. BXA76403. Voltage is the first pin from the left, Signal is connected at the third pin from the left. Minus is the second pin from the front/right.<br /> | ||
* When '''telemetry is not in use''', the throttle servo or ESC is connected to the '''[AIL|CH5]''' port. | * When '''telemetry is not in use''', the throttle servo or ESC is connected to the '''[AIL|CH5]''' port. | ||