Receiver Menu - Telemetry

From BEASTX Wiki
Revision as of 20:24, 8 April 2022 by Shornstein (talk | contribs) (Created page with "{{DISPLAYTITLE:Receiver Menu - Telemetry|noerror}} {{TOC_MBPlusV5|Manuals:MBPlusFblV52:Receiver_B/de|Manuals:MBPlusFblV52:Receiver_N/de|RECEIVERMENU|2}} __TOC__ <br />")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

MICROBEAST PLUS V5

1. Introduction

2. Safety notes

3. Box content and accessories

4. Hardware installation

5. Receiver connection

6. Radio system

7. Receiver Menu
Receiver type
Function assignment
Telemetry input
Throttle failsafe
8. Basic setup
Device orientation
Swashplate servos
Rudder pulse width
Rudder frequency
Rudder control
Swash mixing
Servo directions
Cyclic directions
Servo trim
Cyclic throw
Collective pitch
Servo limit
9. Headspeed Governor
Activating the governor
Sensor test mode
Throttle low position
Throttle high position
Transmitter setup
Signal divider
Main gear ratio
10. Parameters
Trimming
Control style
Special parameters
11. Special features
AttitudeControl (Self leveling)


Bank Switching
Tail motor

12. Factory reset

13. Version information

15. Firmware update

← →


Retrieved from "https://wiki.beastx.com/index.php?title=Translations:Manuals:MBPlusFblV52:Receiver_M/1/de&oldid=19482"