GOVERNOR MENU D - Setting up the transmitter

From BEASTX Wiki
Revision as of 22:53, 30 July 2022 by Shornstein (talk | contribs) (Created page with "{{DISPLAYTITLE:GOVERNOR MENU D - Setting up the transmitter|noerror}} {{TOC_AR7210V5|Manuals:AR7210FblV5:Governormenu_C/de|Manuals:AR7210FblV5:Governormenu_E/de|GOVMENU}} __TO...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

AR7210BX V5

1. Introduction

2. Hardware installation

3. Radio system

4. Basic setup
Device orientation
Swashplate frequency
Rudder pulse width
Rudder frequency
Rudder control
Swash mixing
Servo trim
Servo directions
Cyclic throw
Collective pitch
Servo limit
Cyclic directions
5. Headspeed Governor
Activating the governor
Sensor test mode
Throttle low position
Throttle high position
Transmitter setup
Signal divider
Main gear ratio
6. Additional settings
Trimming
Control style
Special parameters
Gains

7. AttitudeControl (Self leveling)

8. Bank Switching

9. Factory reset

10. Firmware update

← →


Retrieved from "https://wiki.beastx.com/index.php?title=Translations:Manuals:AR7210FblV5:Governormenu_D/5/de&oldid=19906"