Bureaucrats, Administrators, translate-proofr
15,497
edits
Changes
Jump to navigation
Jump to search
Line 23:
Line 23: − + − +
no edit summary
{{WARNING_QUOTE|When using predefined control behaviors other than “transmitter“ we do not recommend to additionally adjust control curves (Expo/Dual rates) in your transmitter as this will indefinably mix the preset curves of MICROBEAST PLUS with the curves of the transmitter! Anyhow, if you only make small adjustments (e.g. slightly increasing the servo throw to increase rotation rate) this should be no problem.<br />
{{WARNING_QUOTE|When using predefined control behaviors other than “transmitter“ we do not recommend to additionally adjust control curves (Expo/Dual rates) in your transmitter as this will indefinably mix the preset curves of MICROBEAST PLUS with the curves of the transmitter! Anyhow, if you only make small adjustments (e.g. slightly increasing the servo throw to increase rotation rate) this should be no problem.<br />
<br />
<br />
[[File:Warning.png|18px|sub]] If the tail gyro is operated in Normal-Rate mode the rudder stick directly controls the rudder servo instead of commanding a rotation rate to the gyro. In this mode the heli will turn as fast as it is determined by the rudder servo position and angle of attack of the rotor blades. The tail gyro does not monitor the rate of rotation. Therfore it is possible when using Normal-Rate mode, that extremely high rotation rates can be achieved. It is absolutely necessary to check how much pitch angle can be achieved at full rudder stick deflection at the tail rotor. Reduce the servo throw of the rudder servo by decreasing it on the remote control or limiting it at [[MB_Plus:Manuals:Setumenu_E|Setup menu point '''E''']] to a reasonable level.}}<br />
[[File:Warning.png|18px|sub]] If the tail gyro is operated in Normal-Rate mode the rudder stick directly controls the rudder servo instead of commanding a rotation rate to the gyro. In this mode the heli will turn as fast as it is determined by the rudder servo position and angle of attack of the rotor blades. The tail gyro does not monitor the rate of rotation. Therfore it is possible when using Normal-Rate mode, that extremely high rotation rates can be achieved. It is absolutely necessary to check how much pitch angle can be achieved at full rudder stick deflection at the tail rotor. Reduce the servo throw of the rudder servo by decreasing it on the remote control or limiting it at [[Manuals:MB_Plus:Setupmenu_E|Setup menu point '''E''']] to a reasonable level.}}<br />
<br />
<br />
----
----
Push the button to save the configuration and to proceed to [[Manual:MB_Plus:Parametermenu_C|Parameter menu point '''C''']].
Push the button to save the configuration and to proceed to [[Manuals:MB_Plus:Parametermenu_C|Parameter menu point '''C''']].
----
----
</translate>
</translate>