Radio setup

From BEASTX Wiki
Revision as of 15:45, 18 March 2024 by Shornstein (talk | contribs) (Created page with "<translate> {{TOC_BXFbl|Manuals:BXFbl:Hardware_Installation/en|Manuals:BXFbl:Radio_System:Futaba_SBUS/en||}} {{DISPLAYTITLE:Radio setup|noerror}} __NOTOC__ </translate>")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

BeastX FBL

1. Introduction

2. Safety notes

3. Hardware installation

4. Radio setup
Futaba SBUS / SBUS2
Jeti EXBUS
SRXL / SUMD / XBUS
Spektrum SRXL2
ExpressLRS / CRSF
FRSKY SPort / FPort
Standard PPM
Serial PPM
5. Receiver Menu
Receiver type
Function assignment
Telemetry input
Throttle failsafe
6. Basic setup
Overview
Device orientation
Swashplate servos
Rudder pulse width
Rudder frequency
Rudder control
Swash mixing
Servo directions
Cyclic directions
Servo trim
Cyclic throw
Collective pitch
Servo limit
7. Headspeed Governor
Activating the governor
Sensor test mode
Throttle low position
Throttle high position
Transmitter setup
Signal divider
Main gear ratio
8. Parameters
Gain adjustment
Trimming
Control style
Special parameters
9. Optional features
AttitudeControl (setup)
AttitudeControl (usage)
Bank Switching
Telemetry

10. Factory reset

11. Version information

12. Firmware update

← →



Retrieved from "https://wiki.beastx.com/index.php?title=Manuals:BXFbl:Radio_Setup&oldid=22530"