SETUP MENU overview

From BEASTX Wiki
Revision as of 07:59, 19 April 2024 by Shornstein (talk | contribs) (Created page with "<translate> <!--T:1--> {{DISPLAYTITLE:SETUP MENU overview|noerror}} {{TOC_BXFbl|Manuals:BXFbl:Setupmenu_intro/en|Manuals:BXFbl:Setupmenu_A/en|SETUPMENU|}} __TOC__ <br /> Here...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search


Here is an overview and a short description of the setup procedure. You will get more details about each menu step in the following sections.

On MICROBEAST PLUS / ULTRA the current menu step is indicated by the LED letters. In SETUP MENU the menu LED must light constantly. If it's flashing, you're in the wrong menu!
With NANOBEAST the current menu step is indicated by number of flashes of the Status LED. In Setup Menu the Status LED will flash in blue color. Steps A to G are indicated by 1 to 7 flashes. From steps H to M onwards again there will be 1 to 7 flashes to indicate the current menu step. But here the first flash will be long.

SETUP MENU overview

Menu Description off purple flashing purple red flashing red blue flashing blue red/blue alternating
A Device orientation horizontal, pins to front vertical, pins to front hor. inv., pins to front vert. inv., pins to front horizontal, pins to back vertical, pins to back hor. inv., pins to back vert. inv., pins to back
B Swashplate servos custom 50 Hz 65 Hz 120 Hz 165 Hz 200 Hz
C Rudder pulse width custom 760 µs 960 µs 1520 µs
D Rudder frequency custom 50 Hz 165 Hz 270 Hz 333 Hz 560 Hz
E Rudder limit limit left limit right
F Rudder direction left right
G Swash mixing custom no mixing 90°(3/4 servos) 120° 140° 135°/140°(1:1)
H Servo directions Servo 1 Servo 2 Servo 3 (Servo 4)
I Cyclic directions left/back right/forward
J Servo trim neutral Servo 1 Servo 2 Servo 3 (Servo 4)
K Cyclic throw neutral Adjust to 6°
L Collective pitch min MAX
M Servo limit Don't fly not good OK perfect!
N Governor off electric heli nitro heli