Manuals:BXFbl:Radio Setup:RemoteSat: Difference between revisions

Jump to navigation Jump to search
← Older editNewer edit →
Marked this version for translation
No edit summary
Line 70: Line 70:


<!--T:25-->
<!--T:25-->
'''MICROBEAST ULTRA'''<br />
'''MICROBEAST ULTRA (v5.9.x)'''<br />
* Insert a Spektrum® ''Bind Plug'' at the '''[AUX|PIT|RUD]''' port.
* Disconnect(!) the Spektrum® remote satellite and switch on the power supply.
* Disconnect(!) the Spektrum® remote satellite
* During init sequence (LED light H-N is running) push and hold the button for 4 seconds, then release
* To bind a DSMX satellite switch on the power supply now. The yellow LED '''A''' on the MICROBEAST ULTRA will start to flash. Now connect your remote satellite to the pin board. The receiver's yellow LED will start to flash as well. Now you can bind the transmitter as usual (for more information refer to the instructions of your radio control system).
* LEDs A and H flash in alternating sequence
* After successful binding procedure the receiver‘s LED will stay solid. Then the device will restart and enter RECEIVER MENU if the current receiver type is not set to DSMX or will start with init sequence. Remove the bind plug and proceed.
* Now connect your remote satellite to the pin board. The receiver's yellow LED will start to flash in combination with LED A on MICROBEAST
* Now you can bind the transmitter as usual (for more information refer to the instructions of your radio control system).
* After successful binding procedure the receiver‘s LED will stay solid
* Your MICROBEAST will restart and enter RECEIVER MENU. Press button briefly to scan for the receiver and proceed.
<br />
<br />
<br />
<!--T:26-->
<gallery mode="nolines">
File:DSMXbind MB ULTRA 1.jpg|You need: RX, bind plug and battery
File:DSMXbind MB ULTRA 2.jpg|Connect bind plug at [AUX-PIT-RUD]
File:DSMXbind MB ULTRA 3.jpg|Power up MICROBEAST: LED A flashes
File:DSMXbind MB ULTRA 4.jpg|Connect RX at [DI2] - it will also flash
File:DSMXbind MB ULTRA 5.jpg|Start bind sequence on radio
File:DSMXbind MB ULTRA 6.jpg|Bind successful
File:DSMXbind MB ULTRA 7.jpg|Proceed with setup
</gallery>
<br />
<br />


Retrieved from "https://wiki.beastx.com/index.php?title=Manuals:BXFbl:Radio_Setup:RemoteSat"