Manuals:BXFbl:Setupmenu D: Difference between revisions
Jump to navigation
Jump to search
Shornstein (talk | contribs) No edit summary |
Shornstein (talk | contribs) Marked this version for translation |
||
| Line 17: | Line 17: | ||
<br /> | <br /> | ||
<!--T:3--> | |||
=Adjustment on the device= | |||
To select the desired servo frequency, move the rudder stick repeatedly in one direction until the Status-LED lights in the correct color at SETUP MENU point '''D'''. Please note that depending on the rudder servo pulse width chosen at Menu Point C, you may not be able to select 560Hz! Servos with Standard pulse width of 1500/1520µs can only run at maximum frame rate of 400Hz.<br /> | To select the desired servo frequency, move the rudder stick repeatedly in one direction until the Status-LED lights in the correct color at SETUP MENU point '''D'''. Please note that depending on the rudder servo pulse width chosen at Menu Point C, you may not be able to select 560Hz! Servos with Standard pulse width of 1500/1520µs can only run at maximum frame rate of 400Hz.<br /> | ||
<br /> | <br /> | ||
| Line 26: | Line 27: | ||
<br /> | <br /> | ||
<!--T:5--> | |||
=Setup with StudioX app= | |||
Choose a preset frequency by clicking one of the provided buttons for Menu Point D (Rudder servo update rate) or set a custom frequency by clicking the gear symbol and directly changing the value with the dial or buttons. Using a custom frequency you can go up to 400 Hz frame rate for rudder servos with standard pulse width of 1500/1520µs. Usually this is plenty enough even for the fastest servos on the market. Going higher is not possible due to technical reasons (the servo pulse at maximum deflection would not fit into the frame properly!). If you want to get top notch performance, we recommend using a servo with 760 µs pulse width. This allows frequencies up to 600 Hz.<br /> | Choose a preset frequency by clicking one of the provided buttons for Menu Point D (Rudder servo update rate) or set a custom frequency by clicking the gear symbol and directly changing the value with the dial or buttons. Using a custom frequency you can go up to 400 Hz frame rate for rudder servos with standard pulse width of 1500/1520µs. Usually this is plenty enough even for the fastest servos on the market. Going higher is not possible due to technical reasons (the servo pulse at maximum deflection would not fit into the frame properly!). If you want to get top notch performance, we recommend using a servo with 760 µs pulse width. This allows frequencies up to 600 Hz.<br /> | ||
<br /> | <br /> | ||