SETUP MENU overview
Here is an overview and a short description of the setup procedure. You will get more details about each menu step in the following sections.
On MICROBEAST PLUS / ULTRA the current menu step is indicated by the LED letters. In SETUP MENU the menu LED must light constantly. If it's flashing, you're in the wrong menu!
With NANOBEAST the current menu step is indicated by number of flashes of the Status LED. In Setup Menu the Status LED will flash in blue color. Steps A to G are indicated by 1 to 7 flashes. From steps H to M onwards again there will be 1 to 7 flashes to indicate the current menu step. But here the first flash will be long.
SETUP MENU overview
| Menu | Description | off | purple flashing | purple | red flashing | red | blue flashing | blue | red/blue alternating |
|---|---|---|---|---|---|---|---|---|---|
| A | Device orientation | horizontal, pins to front | vertical, pins to front | hor. inv., pins to front | vert. inv., pins to front | horizontal, pins to back | vertical, pins to back | hor. inv., pins to back | vert. inv., pins to back |
| B | Swashplate servos | custom | 50 Hz | 65 Hz | 120 Hz | 165 Hz | 200 Hz | ||
| C | Rudder pulse width | custom | 760 µs | 960 µs | 1520 µs | ||||
| D | Rudder frequency | custom | 50 Hz | 165 Hz | 270 Hz | 333 Hz | 560 Hz | ||
| E | Rudder limit | limit left | limit right | ||||||
| F | Rudder direction | left | right | ||||||
| G | Swash mixing | custom | no mixing | 90°(3/4 servos) | 120° | 140° | 135°/140°(1:1) | ||
| H | Servo directions | Servo 1 | Servo 2 | Servo 3 | (Servo 4) | ||||
| I | Cyclic directions | left/back | right/forward | ||||||
| J | Servo trim | neutral | Servo 1 | Servo 2 | Servo 3 | (Servo 4) | |||
| K | Cyclic throw | neutral | Adjust to 6° | ||||||
| L | Collective pitch | min | MAX | ||||||
| M | Servo limit | Don't fly | not good | OK | perfect! | ||||
| N | Governor | off | electric heli | nitro heli | |||||