Translations:Manuals:BXFbl:Setupmenu M/1/de

From BEASTX Wiki
Revision as of 13:53, 12 June 2024 by Shornstein (talk | contribs) (Created page with "{{TOC_BXFbl|Manuals:BXFbl:Setupmenu_L/de|Manuals:BXFbl:Setupmenu_N/de|SETUPMENU|}} __TOC__ <br />")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

BeastX FBL

1. Introduction

2. Safety notes

3. Hardware installation

4. Radio setup
Futaba SBUS / SBUS2
Jeti EXBUS
SRXL / HOTT / XBUS
Spektrum SRXL2
ExpressLRS / CRSF
FRSKY SPort / FPort
DSMX / DMSS / iBUS
Standard PPM
Serial PPM
5. Receiver Menu
Receiver type
Function assignment
Telemetry input
Throttle failsafe

6. Overview

7. Setup menu
Device orientation
Swashplate servos
Rudder pulse width
Rudder frequency
Rudder control (servo)
Rudder control (motor)
Swash mixing
Servo directions
Cyclic directions
Servo trim
Cyclic throw
Collective pitch
Servo limit
Activating the governor

8. Gain adjustment

9. Parameters
Trimming
Control style
Flight parameters
10. Headspeed Governor
Sensor test mode
Throttle low position
Throttle high position
Transmitter setup
Signal divider
Main gear ratio
11. Optional features
AttitudeControl (setup)
AttitudeControl (usage)
Bank Switching
Telemetry Hub

12. Factory reset

13. Version information

14. Firmware update

← →


Retrieved from "https://wiki.beastx.com/index.php?title=Translations:Manuals:BXFbl:Setupmenu_M/1/de&oldid=24464"