SETUP MENU A - Device orientation
The BEASTX systems can be mounted in nearly all possible orientations. The only restriction is that the main connection terminal must point in or against flying direction and the egdes of the unit must be parallel to the rotation axis. Please see section Hardware Installation for further illustrations.
Adjustment at the device
At menu point A of SETUP MENU select the orientation that the device is actually mounted on your heli by choosing the suitable Status LED color. You can switch between the options by briefly moving the rudder stick to one or the other direction. The Status-LED will change the color accordingly.
| Status-LED | Device orientation |
|---|---|
| off | flat - sticker on top side - socket points in flight direction |
| purple flashing | vertical - button is on the top - socket points in flight direction |
| purple | flat inverted - sticker on bottom side - socket points in flight direction |
| red flashing | vertical inverted - button is on the bottom - socket points in flight direction |
| red | flat - sticker on top side - socket points to the tail boom |
| blue flashing | vertical - button is on the top - socket points to the tail boom |
| blue | flat inverted - sticker on bottom side - socket points to the tail boom |
| red/blue | vertical inverted - button is on the bottom - socket points to the tail boom |
Setup with StudioX app
At the first screen of heli setup wizard choose the orientation that the device is actually mounted on your heli by choosing the matching type in the app.
