7,611
edits
Changes
Jump to navigation
Jump to search
Updating to match new version of source page
{{DISPLAYTITLE:SETUP MENU H - Servo directions|noerror}}
{{TOC_BXFbl|Manuals:BXFbl:Setupmenu_G/en|Manuals:BXFbl:Setupmenu_I/en|SETUPMENU|}}
__TOC__
<br />
At SETUP MENU point '''H''' we move the collective pitch on the radio and adjust the servo directions so that all servos are pushing the swashplate up and down together. The other conrtol functions are disabled here, as they are not of interest at this setup step! Then after adjusting servo directions, make sure that the pitch direction is correct! You can either change pitch direction by setting the servo directions correctly right from the beginning or by changing the direction of the pitch channel in the radio.<br />
<br />
{{QUOTE|'''Please note:''' You can't reverse the servos with the servo reverse function of your transmitter! The transmitter only controls the functions of your BEASTX system. It doesn't move the servos directly! Thus, reversing a channel in the radio will only reverse the control function in total. It will not change directions of a single servo.}}<br />
<br />
<br />
=Adjustment on the device=
By tapping the '''rudder''' stick you can '''select one servo after another''' at SETUP MENU point '''H'''. Every color of the Status-LED is corresponding to a specific servo channel. Also the selected servo will give by a brief up and down move. You can switch back and forth between the servos as often as you need. When you tap the '''roll/aileron''' stick once, the selected servo will '''reverse its direction'''.<br />
<br />
{|cellpadding="4" cellspacing="0" border="1"
| style="width:100px; text-align:left;" | '''Status-LED''' || style="text-align:center;" | '''Servo reverse'''
|-
| style="color:white; background-color:#CC66CC" | purple || CH1 – elevator/pitch servo
|-
|style="color:white; background-color:#FF3300" | red ||CH2 – aileron/roll servo (1)
|-
| style="color:white; background-color:#0066FF" | blue || CH3 – aileron/roll servo (2) <!-- no pitch servo as this step is not provided for mCCPM! -->
|-
| style="color:white; background: linear-gradient(to right, #FF3300, black, #0066FF)" | red/blue || CH6/CH7 – elevator/pitch servo (2) (if provided)
|}
<br />
<br />
<br />
=Setup with StudioX app=
When the adjustment screen for servo directions appear, make sure the pitch is moving correctly as described above. Set servo directions for each servo by clicking the corresponding buttons as needed.<br />
<br />
[[File:Basic_setup_servo_trim.PNG|x250px]]<br />
<br />
<br />
<br />
{{TOC_BXFbl|Manuals:BXFbl:Setupmenu_G/en|Manuals:BXFbl:Setupmenu_I/en|SETUPMENU|}}
__TOC__
<br />
At SETUP MENU point '''H''' we move the collective pitch on the radio and adjust the servo directions so that all servos are pushing the swashplate up and down together. The other conrtol functions are disabled here, as they are not of interest at this setup step! Then after adjusting servo directions, make sure that the pitch direction is correct! You can either change pitch direction by setting the servo directions correctly right from the beginning or by changing the direction of the pitch channel in the radio.<br />
<br />
{{QUOTE|'''Please note:''' You can't reverse the servos with the servo reverse function of your transmitter! The transmitter only controls the functions of your BEASTX system. It doesn't move the servos directly! Thus, reversing a channel in the radio will only reverse the control function in total. It will not change directions of a single servo.}}<br />
<br />
<br />
=Adjustment on the device=
By tapping the '''rudder''' stick you can '''select one servo after another''' at SETUP MENU point '''H'''. Every color of the Status-LED is corresponding to a specific servo channel. Also the selected servo will give by a brief up and down move. You can switch back and forth between the servos as often as you need. When you tap the '''roll/aileron''' stick once, the selected servo will '''reverse its direction'''.<br />
<br />
{|cellpadding="4" cellspacing="0" border="1"
| style="width:100px; text-align:left;" | '''Status-LED''' || style="text-align:center;" | '''Servo reverse'''
|-
| style="color:white; background-color:#CC66CC" | purple || CH1 – elevator/pitch servo
|-
|style="color:white; background-color:#FF3300" | red ||CH2 – aileron/roll servo (1)
|-
| style="color:white; background-color:#0066FF" | blue || CH3 – aileron/roll servo (2) <!-- no pitch servo as this step is not provided for mCCPM! -->
|-
| style="color:white; background: linear-gradient(to right, #FF3300, black, #0066FF)" | red/blue || CH6/CH7 – elevator/pitch servo (2) (if provided)
|}
<br />
<br />
<br />
=Setup with StudioX app=
When the adjustment screen for servo directions appear, make sure the pitch is moving correctly as described above. Set servo directions for each servo by clicking the corresponding buttons as needed.<br />
<br />
[[File:Basic_setup_servo_trim.PNG|x250px]]<br />
<br />
<br />
<br />